COMPANY 스킵네비게이션

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to attempt to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is particularly large, you might think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems, including sliding. A window repair that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. With an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial test fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the house.

It is also important to note that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease, it may be the hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It is essentially a very simple procedure, but it is simpler if you have someone to assist in holding the frame up.

Verify that the uPVC hinges open and close in the right direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to offer suggestions.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also reduce the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become unbalanced due to wear, creating an opening between the frame and sash. These can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to get them realigned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.

One of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes filled with some type of filler. They can be positioned on the top of your windowsill. They will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is cheaper to replace them rather than repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert as soon as you can.